Need help?Do you have a question about the Riello RL 800/M FS2 and is the answer not in the manual?
General| Burner Type | Monoblock |
|---|---|
| Fuel Type | Light oil |
| Operation | Two stage |
| Air Pressure Switch | Yes |
| Flame Supervision | UV cell |
| Control System | Electronic |
| Electrical Supply | 400V, 50Hz |
Details product compliance with technical standards and European directives.
Outlines manufacturer's warranty terms and conditions, and user responsibilities.
Defines user and personnel roles, training needs, and safety obligations.
Emphasizes safety measures during installation, including power disconnection and qualified personnel.
Guides on adjusting the pressure regulator for optimal oil delivery and return line settings.
Details the essential steps for priming the oil pump before operation.
Emphasizes safety procedures and requirements for the initial burner start-up.
Details synchronizing fuel/air using a servomotor and cam for optimal combustion.
Details the procedures for adjusting oil pump pressure, air cam, and oil cam for optimal air/fuel mix.
Outlines essential safety precautions before performing any maintenance or calibration.
Details checks and cleaning procedures for combustion head, photocell, filters, burner, fan, and pump.
Covers nozzle replacement, flexible hose checks, fuel tank cleaning, and combustion checks.
Lists common burner faults for light oil operation, their probable causes, and suggested remedies.
To Next Page
