Need help?Do you have a question about the Riello RL 50 and is the answer not in the manual?
General| Burner Type | Monoblock |
|---|---|
| Air Regulation | Mechanical |
| Fuel Type | Oil |
| Ignition Type | Electric |
| Power Supply | 230V, 50Hz |
Recommendations for using bio fuel blends safely.
Details hazard levels and symbols for potential dangers.
Fundamental safety practices for operating the appliance.
Requirements for qualified personnel and user responsibilities.
Crucial safety guidelines to follow during installation.
Specific guidance for installers regarding bio fuel.
Steps for securely attaching the burner to the boiler.
Process for calibrating the combustion head for optimal output.
Procedures for selecting and fitting fuel nozzles.
Adjusting combustion head based on 2nd stage fuel delivery.
Specific performance data for the pump.
Procedure for priming the fuel pump before operation.
Critical safety warnings for electrical work.
Essential safety precautions before initial operation.
Steps for calibrating the burner for optimal performance.
The initial process of firing the burner and adjustments.
Step-by-step process for igniting the burner.
Critical safety measures before performing maintenance.
Procedures for inspecting and cleaning burner components.
Inspecting pump performance and fuel hoses.
Advice on cleaning and replacing fuel nozzles.
Procedures for safely opening the burner casing.
Steps for correctly reassembling the burner casing.
Understanding diagnostic codes for start-up issues.
To Next Page
