To Next PageTo Next Page
Need help?Do you have a question about the Riello RL 34/1 MZ and is the answer not in the manual?
Provides a detailed breakdown and identification of the burner's main components and parts.
Provides diagrams and information for selecting the appropriate burner delivery based on combustion chamber pressure.
Defines the permissible and preferred installation positions for the burner, emphasizing safety and maintenance access.
Provides step-by-step instructions for physically attaching the burner to the boiler, including necessary disassemblies.
Advises on selecting appropriate nozzles to meet emission requirements and ensure correct burner operation.
Details the procedure for installing the selected nozzles into the burner assembly, emphasizing careful handling.
Explains how to adjust the combustion head based on burner output and diagrams for optimal combustion.
Guides the user through the critical process of priming the fuel pump, including bleeding air and initial start-up procedures.
Details the sequential steps and timing involved in the burner's start-up cycle.
Describes the conditions under which the burner enters a lockout state due to ignition failure.
Explains the burner's behavior if the flame extinguishes during operation, including automatic restart attempts.
Explains the procedure to reset the control box after a lockout condition by holding the button.
Describes how to view diagnostic information for lockout causes by observing LED pulse counts.
Explains how to access software diagnostics via an optical link with a PC for detailed operational data.
General
