To Next PageTo Next Page
Need help?Do you have a question about the Riello RS 70/E MZ and is the answer not in the manual?
General| Power Output | 70 kW |
|---|---|
| Air Regulation | Mechanical |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Supply | Single-phase |
| Fuel Type | Natural Gas |
| Firing Rate (kW) | 70 |
| Stages | Two-stage |
| Control | Electronic |
Details on progressive two-stage or modulating operation of gas burners.
Requirements for qualified personnel and user responsibilities for training.
Explanation of the burner model naming convention and its components.
Detailed technical specifications, including output, fuel, operation, and electrical data.
Diagrams illustrating burner firing rates based on combustion chamber dimensions.
Identification and numbering of major burner components with a detailed diagram.
Description and technical data of the control box for optimizing air/fuel ratio.
Details on servomotors controlling air damper and gas butterfly valve, including technical data.
Critical safety instructions and precautions before and during burner installation.
Instructions for boring the boiler plate and securing the burner, including blast tube length.
Specific procedure for pre-calibrating the combustion head for the RS 130/E MZ model.
Guidance on adjusting the combustion head for optimal air and gas settings based on output.
Steps for assembling the gas train, connecting it to the burner, and safety checks.
Safety notes and procedures for carrying out electrical wiring in compliance with standards.
Critical safety warnings for personnel performing the initial burner start-up.
Detailed steps for calibrating air and gas pressure switches for correct operation.
Explanation of the operator panel's symbols, keys, and display functions.
Detailed sequence of burner operation phases, signals, and servomotor positions.
A table detailing error codes, their meanings, and recommended troubleshooting measures.
