Need help?Do you have a question about the Riello RS 34 MZ and is the answer not in the manual?
General| Burner Type | Monoblock |
|---|---|
| Air Pressure Switch | Yes |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Fuel Type | Natural Gas |
| Stages | Two stage progressive |
| Power Consumption | 500 W |
General guidance for installation, usage, and upkeep of the burner.
Describes the burner's operational modes for progressive two-stage performance.
Details about the product's identification plate for model and technical data.
Crucial safety advice and manufacturer responsibilities regarding installation and use.
Guidance for burner operation and indications of fault conditions.
Essential safety rules for appliance use, covering personnel and environment.
Purpose and essential information about the instruction manual.
Procedures for system delivery and proper handling of the manual.
Specifications like output, fuel, electrical supply, and noise levels.
Details on different models and configurations available for the burners.
Classification of gas types and country compatibility for burner operation.
Details on optional kits like radio disturbance protection, long heads, and PC interface.
Detailed breakdown of burner parts and their functions.
Information on product packaging, weight, and physical measurements.
List of items included as standard with the burner.
Burner output performance charts under specific conditions.
Boiler specifications for testing and considerations for commercial integration.
Data and examples for calculating gas pressure losses in the supply line.
General requirements and applicable standards for burner installation.
Recommended orientations for burner installation for optimal function.
Preparing the boiler mounting plate and selecting the correct blast tube length.
Procedures for securely mounting the burner to the boiler.
Adjusting the combustion head for optimal performance.
Calibrating airflow and fine-tuning central air delivery.
Connecting the gas supply line to the burner.
Components of the gas supply system and EN 676 approval details.
Pre-ignition setup and calibration steps required before first start.
Servomotor function, adjustment, and calibration.
Step-by-step guide for initial burner ignition.
Procedures for achieving stable burner operation after ignition.
Optimizing burner performance through calibration.
Measuring the minimum firing output according to regulations.
Setting the burner's multi-stage output levels.
Setting 1st stage output and adjusting gas delivery.
Adjusting mid-range burner outputs and airflow.
Setting the air pressure switch for correct operation.
Setting the minimum gas pressure switch.
Verifying the functionality of the flame detection system.
Indicators for correct operation and troubleshooting no-start conditions.
Description of burner states and operational sequences.
Causes and resolution for firing failures and flame loss during operation.
Verifying all settings and safety mechanisms after installation.
Requirements for periodic servicing to ensure burner reliability.
Procedures to safely access and reassemble the burner.
Servicing the electrical control panel and its components.
Understanding fault codes using LED indicators during start-up.
Procedures to reset the control unit and interpret LED fault patterns.
Using a PC link for detailed diagnostics and operation data.
Monitoring burner status and flame detection timing.
Wiring diagrams and guidelines for correct electrical installation.
Detailed technical data for models RS 34 MZ and RS 44 MZ.
Overview of model variants and gas type compatibility.
Details on optional kits for LPG, long heads, and PC interface.
Detailed breakdown of burner parts and their functions.
Information on product packaging, weight, and physical measurements.
List of items included as standard with the burner.
Burner output performance charts for different models.
Boiler specifications for testing and integration considerations.
Data and examples for calculating gas pressure losses.
Recommended installation positions and boiler plate preparation.
Guidance on selecting the correct blast tube length for installation.
Procedures for securely mounting the burner to the boiler.
Adjusting the combustion head and airflow for optimal combustion.
Fine-tuning the central air delivery for specific applications.
Connecting the gas supply line to the burner system.
Components of the gas supply system and EN 676 approval details.
Pre-ignition setup and calibration steps required before first start.
Servomotor function, adjustment, and calibration.
Step-by-step guide for initial burner ignition.
Optimizing burner performance through calibration.
Measuring the minimum firing output according to regulations.
Setting the burner's multi-stage output levels.
Setting 1st stage output and adjusting gas delivery.
Adjusting mid-range burner outputs and airflow.
Setting the air pressure switch for correct operation.
Setting the minimum gas pressure switch.
Verifying the functionality of the flame detection system.
Indicators for correct operation and start-up sequences.
Handling firing failure and flame loss during operation.
Verifying all settings and safety mechanisms after installation.
Routine servicing for combustion, leaks, filter, head, servomotor, and burner.
Procedures to safely access and reassemble the burner.
Servicing the electrical control panel and its components.
Understanding fault codes using LED indicators during start-up.
Procedures to reset the control unit and interpret LED fault patterns.
Using a PC link for detailed diagnostics and operation data.
Monitoring burner status and flame detection timing.
Wiring diagrams and guidelines for correct electrical installation.
To Next Page
