To Next PageTo Next Page
Need help?Do you have a question about the Riello RS 50/M MZ and is the answer not in the manual?
General| Burner Type | Monoblock |
|---|---|
| Air Pressure Switch | Yes |
| Voltage | 230 V |
| Motor Power | 0.75 kW |
| Fuel Type | Natural Gas / LPG |
Requirements for qualified personnel, safety instructions, and user responsibilities.
Key technical specifications including output, fuel, electrical data, and noise level.
Details on the RMG/M 88.62 control box for burner operation.
Critical safety precautions to be observed during burner installation.
Instructions for mounting the burner to the boiler, including drilling and blast tube selection.
Steps for adjusting the air and gas settings of the combustion head.
Guidance on connecting the gas train to the burner and its components.
Instructions for safe and correct electrical connections, referencing appendix layouts.
Procedure for calibrating the motor thermal relay for protection.
Essential safety precautions for initial burner start-up by qualified personnel.
Pre-start-up checks including gas supply, valves, and pressure switches.
Procedures and checks related to achieving burner ignition.
Guidance on adjusting burner output, including ignition, max, and min settings.
How to measure and adjust gas delivery based on pressure and output.
Procedures for setting the burner's minimum output level.
Adjusting air damper settings for optimal combustion.
How to adjust and check the air pressure switch for safety.
Procedure for adjusting the maximum gas pressure switch.
Critical safety precautions before performing any maintenance tasks.
