To Next PageTo Next Page
Need help?Do you have a question about the Riello Start 24 KI and is the answer not in the manual?
Installation must be by a qualified company following standards and booklet.
Covers intended use, water leakage, maintenance, electrical connections, disposal, and operational safety.
Addresses fuel smell, touching appliance, modifying devices, cables, ventilation, and flammable containers.
Adjust maximum output and domestic hot water minimum using specific tools.
Electric adjustment activated/deactivated by jumper JP1; procedure involves panel controls.
Essential checks before ignition and functional testing: taps, gas type, pressure.
Check start-up, shutdown, and operation by acting on controls and performing checks.
Power boiler, open gas tap, adjust thermostat, set mode selector for Winter/Summer.
Activates self-adjusting system for heating water temperature for comfort and savings.
Includes Antifreeze and Circulator anti-blocking functions for protection.
Lists boiler statuses, display symbols, and corresponding alarm types.
Procedures for resetting alarms and handling specific faults like A04, A06, A07.
Lists annual maintenance tasks for the boiler.
Provides technical data for heating and domestic hot water output and capacity.
Details gas capacity, flue gas temperature, flow rate, and air capacity.
Energy efficiency classes, rated heat output, and efficiency ratings.
Explains the meaning of icons shown on the digital display.
General