Need help?Do you have a question about the Riello KIS Series and is the answer not in the manual?
General| Type | Condensing Boiler |
|---|---|
| Heat Exchanger Material | Stainless Steel |
| Fuel Type | Natural Gas / LPG |
| Efficiency | Up to 98% |
| Warranty | 5 years (subject to terms and conditions) |
Details on cleaning the heating system and water characteristics for optimal boiler operation.
Guidelines and standards for boiler installation, including safety precautions.
Details on the automatic anti-freeze system and the use of an antifreeze heater kit.
Specifies the required clearances for boiler installation and maintenance.
Guidance on connecting the condensation exhaust system to ensure proper evacuation.
Instructions for making low and high voltage electrical connections to the boiler.
Procedure for connecting the gas supply in compliance with installation standards.
Instructions for installing flue gas exhaust and combustion air suction systems.
Guidance on installing the boiler on collective flue systems and regulations.
Procedure for filling the heating system and removing air for proper operation.
Explanation of the buttons and their functions on the REC10CH control panel.
Essential checks to perform before starting up the boiler for the first time.
Steps for setting up the boiler's operational parameters via the machine interface.
Procedure for the initial startup and configuration of the boiler system.
Setting up the boiler's hydraulic configuration and operating parameters.
Procedure for adjusting heating water setpoint when no outdoor sensor is used.
How to adjust the domestic hot water setpoint on the boiler.
Guidelines for periodic maintenance and cleaning of the boiler components.
Detailed wiring diagram showing electrical connections for boiler components.
Steps to access and navigate technical parameters on the control panel.
How to access the settings, technical, and info system menus.
To Next Page