Do you have a question about the RIESE & MULLER Packster and is the answer not in the manual?
Frame Material | Aluminum |
---|---|
Motor | Bosch Cargo Line / Performance Line |
Battery | Bosch PowerPack/PowerTube |
Max Load Capacity | 200 kg (total permissible weight) |
Gears | Enviolo |
Brakes | Hydraulic disc brakes |
Tires | Schwalbe Big Ben |
Weight | Approximately 35-40 kg (depending on configuration) |
Dimensions | Varies by configuration |
Secure the rubber cord at the front of the child cover.
Insert the left and right rods into their respective positions.
Attach the rubber cord to both the left and right sides.
For Packster 80, move child seat forward and hang rope with third knot.
For Packster 60, hang rope with first knot (high position) or second knot (low position).
Extend the side walls of the cover and secure them with zippers.
Ensure the child cover is properly stretched for a snug fit.
Adjust the handlebar to its highest position.
Open zippers, fold up side walls, and roll them tightly.
Fix the rolled sidewalls with velcro at the downside of the roof.