Need help?Do you have a question about the RIESE & MULLER load and is the answer not in the manual?
General| Brand | RIESE & MULLER |
|---|---|
| Model | load |
| Category | Bicycle Accessories |
| Language | English |
German road traffic regulations for legal use on public roads.
Legal mandate for two independent braking systems on E-bikes.
Official marks and specifications for bike lighting devices.
Mandatory reflectors for visibility and safety on bicycles.
License, insurance, and registration requirements for fast e-bikes.
Strong encouragement to wear a helmet due to higher speeds.
Guidance on traffic regulations specific to fast e-bikes.
Regulations concerning reflectors and rearview mirrors for safety.
Traffic regulations related to transporting children on fast e-bikes.
Modifications can void factory approval and technical capabilities.
Guidelines for attaching carriers and child seats.
Approved trailer types and maximum towing capacities.
Importance of proper saddle and handlebar adjustment for comfort.
Advice on adjusting suspension to suit riding needs.
Ensures quick releases and axle bolts are properly secured.
Verifying suspension movement and resistance.
Checking tire condition and correct air pressure.
Ensuring lights function correctly, even when stationary.
Checking brake lever travel and pad contact.
Explains the lever and locking nut mechanism of quick releases.
Step-by-step guide on opening and closing quick release levers.
Method for setting the correct saddle height for optimal pedaling.
Adjusting saddle fore/aft position and tilt for comfort.
Adjusting handlebar height for an upright or outstretched position.
How to adjust height and angle on specific stem types.
Using spacer rings to adjust handlebar height.
Rotating the handlebar for a relaxed wrist position.
Adjusting the brake lever position for easier reach.
Rotating brake levers for a straight forearm alignment.
Adjusting spring preload and damping for desired ride characteristics.
Steps for safely removing and reinstalling the rear shock spring.
Setting the initial sag of the suspension when rider is on the bike.
Recommended cleaning and greasing for shock maintenance.
Preload adjustment using an air pump for air suspension forks.
Referencing manufacturer instructions for fork maintenance.
Recommended sag percentage for optimal front fork performance.
Techniques for effective braking, including weight shift.
Standard layout for front and rear brake levers.
Checking brake pad and rim wear for safe operation.
Information on disc brake function, contamination, and maintenance.
How V-brakes work and essential function checks.
Adjusting V-brakes for synchronized pad-to-rim contact.
Readjusting the brake cable for correct lever response.
Reference to manufacturer instructions for hydraulic rim brakes.
How to use and best practices for coaster brake operation.
How the shifting system adapts performance to terrain and speed.
Techniques for smooth pedaling and optimal cadence.
Explanation of derailleur system effectiveness and operation.
Describes twist grip and rapid fire shifters used on R&M bikes.
Checks and adjustments for precise shifting performance.
How to tension the rear derailleur cable for accurate shifting.
Advantages and operation of internally geared hubs (IGH).
Procedure for aligning marks on Shimano 8-speed IGH.
Aligning the yellow mark on the DualDrive IGH clickbox.
Refers to separate Rohloff manual for adjustments.
Refers to separate NuVinci manual for adjustments.
Proper cleaning and lubrication techniques for the bicycle chain.
Factors affecting chain life and when to replace it.
How to check if the chain has the correct tension.
Procedures to adjust chain tension on various dropout types.
Verifying brake and shifting function after chain tension adjustment.
Recommends dealer for chain replacement due to special tools.
Using correct tooth count sprockets to maintain chain tension.
Explains the hub, rim, spokes, and tire assembly.
Importance of correct tire pressure for performance and failure prevention.
Information on the tire tube and presta valve system.
Checking tires for wear, damage, and tread condition.
Importance of wheel trueness for braking and safety.
How wheels are attached via axle nuts or quick releases.
Details on the components and function of quick release systems.
Steps required to prepare for wheel removal, like unhooking brakes.
How to unhook V-brake cables for wheel removal.
Notes on disassembly for wheels with disc brakes.
Shifting to the smallest sprocket for easier rear wheel removal.
Steps for removing the rear wheel with Shimano Internally Geared Hub.
Facilitating wheel removal using quick releases and tensioners.
Techniques for safely removing tire from the rim.
Process for installing a tire back onto the rim.
How the headset allows the fork and handlebars to rotate.
Method for checking and tightening headset bearings to prevent play.
Inspecting wires and connections for damage or corrosion.
Adjusting the front light beam height and reach for optimal visibility.
Using Racktime snap-it system for baskets and child seats.
Checks for secure mounting, weight limits, and child safety.
Ensuring kickstand screws are tight for stability.
Notes on automatic folding kickstands and potential instability.
Steps for greasing and tightening pedals to specified torque.
Advice on lane position, visibility, and traffic interaction for fast riding.
Recommendations for securing the e-bike during rail transport.
Prohibitions on transporting e-bike batteries on aircraft.
Advice on using roof racks, including compatibility and safety.
Tips for disassembling and packing the e-bike into a vehicle.
Considerations for using car rear racks and potential frame damage.
Refers to notes on wheel removal for disc brake bikes.
Importance of regular maintenance for safe operation and longevity.
Recommended methods for cleaning and protecting the e-bike.
Steps for protecting paint and metallic surfaces with wax.
Recommendations for short-term storage in a dry area.
Steps for winter storage, including tire care and gear selection.
Importance of regular inspections to prevent damage and ensure function.
Guidelines for environmentally friendly disposal of bike-related materials.
Requirements for valid extended warranty claims.
Parts subject to wear and their eventual need for replacement.
Torque specifications for frame, fork, and steering linkage on Load model.
Torque specifications for stem clamping and adjustment screws.
Details and record-keeping for the first inspection.
Details and record-keeping for the second inspection.
Details and record-keeping for the third inspection.
Details and record-keeping for the fourth inspection.
Details and record-keeping for the fifth inspection.
Details and record-keeping for the sixth inspection.
To Next Page
