53
REPAIRING A PUNCTURE
PREPARING TO REMOVE THE WHEEL
Each model has certain things that must be
done before the wheel can be removed.
These are described below.
Unhook V-brakes
With V-brakes the brake cable must first be
unhooked. Grasp it with one hand, moving
the cable hanger A and the guide tube B
with the other hand. If the brake cable is set
to tight, you can reduce the tension by turn
-
ing the barrel adjuster on the brake lever.
DISC BRAKES
Please note the tips regarding disassembly
of wheels on page 35.
TIP!
Depending on the E-bike model,
the removal and replacement
of the rear wheel may be more
dicult than you are used to.
Carefully read the notes on the
following pages. Should you
encounter any problems your
dealer or Riese & Müller are at
your disposal.
B
A
To Next Page
Loading...
