34
ADJUSTING THE SUSPENSION FORK
AIR SUSPENSION FORKS
With air suspension forks, the preload is set
using the standard (supplied) air pump.
For details regarding the adjustment of
these forks, please see the separately en
-
closed instructions from the shock manu-
facturer. Please also visit the manufacturers
homepages at the Internet:
• www.ridefox.com
• www.xfusionshox.com
• www.srsuntour-cycling.com
Maintenance of suspension forks
Please refer to the notes in the separately
enclosed instructions from the various
suspension fork manufacturers.
DANGER!
When rotating in the “-” direc-
tion and you receive some
resistance, you should not
continue turning to prevent over
loosening the tting. This could
cause an accident!
DANGER!
The suspension components at
your E-bike are safety-relevant.
Check and maintain the suspen-
sion components of your E-bike
on a regular base or let this be
done by your local dealer.
Suspension fork adjustment
The sag for the suspension fork should also
be approximately 20 %.
With RST and Suntour suspension forks, you
adjust the preload with one or two knobs
on the fork crown. Turning the knob towards
the “+” will increase the preload, turning it
towards the “-” reduces preload.
Should the amount of adjustment prove
insucient, please contact your dealer.
He can check if your front fork can be tuned
harder or softer.
To Next Page
Loading...
