EasyManua.ls Logo

RIESE & MULLER load - Belt Drive System; Chain Replacement Procedure; Sprocket Replacement Guidelines

RIESE & MULLER load
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
A poorly riveted chain can break
and lead to a fall. It’s best to let
your dealer replace the chain.
DANGER!
REPLACING THE CHAIN
The replacement of a chain is best left to
your dealer who has special tools to accu
-
rately measure your chain and to cut your
chain to the appropriate length. Many mod
-
ern chains have no chain lock and a special
tool is required to link up the two halves of
the chain. Your dealer has all of the tools that
match your chain.
REPLACING THE SPROCKET
BELT DRIVE
If your E-Bike is fitted with a belt drive please
follow the instructions in the separately
included Gates manual.
ATTENTION!
At the models Avenue, Culture and
Kendu the front sprocket must
always be replaced by parts with the
same number of teeth. Using other
sprocket sizes affects the chain tensi-
on and the chain may snatch
or fall down!
BELT DRIVE

Related product manuals