16
DANGER!
BEFORE EVERY RIDE QUICK CHECK
Before each ride the following items must
be checked:
QUICK RELEASE/AXLE BOLTS/THRU AXLES
Are the quick releases or bolts of stem, sad
-
dle, front and rear wheel properly secured?
More details can be found on page 16 – 17.
SUSPENSION
Check to make sure the suspension is
functioning. Press down on the saddle to
check the rear saddle. While holding the
front brake, press down on the handlebars to
check the suspension fork. In both cases the
suspension should move up and down with
uniform resistance and without significant
noise. No components of the bicycle should
scrape or rub together.
TIRES
Sind die Reifen in gutem Zustand? Stimmt
der Are the tires in good condition? Is the air
pressure correct? More information regard
-
ing tires can be found on page 47–50.
LIGHTING
Do the lights stay on when standing still?
More information regarding lighting can be
found on page 59.
BRAKES
Vigorously pull the brake lever. The levers
should stop just before reaching the han
-
dlebar. The brake pads on rim brakes must
touch the entire rim area while not touching
the tire. More details on the brakes can be
found on page 33 – 38.
Quick releases and ttings that
are not properly closed can
result in severe accidents!
Check the tight t of quick
releases, thru axles and bolts
even if you parked your E-bike
only shortly at an unattended
place. Do not ride your E-bike
with untightened quick releases.
To Next Page
Loading...
