EasyManua.ls Logo

RIESE & MULLER load - Lighting System; Locating Lighting Defects; Headlight Beam Adjustment

RIESE & MULLER load
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DANGER!
Never use your E-bike without
working lights! At night it is very
dicult to see obstacles and to
be seen by other road users.
Serious accidents can result!
An incomplete or malfunctioning
lighting system is not only illegal
but also endangers your life.
The light at all Riese & Müller E-bikes is
switched on and o at the Bosch display.
At HS-models the light is automatically
switched on.
LOCATING DEFECTS
Visually inspect the entire length of the wire
for damage. Verify all of the contact points
are intact. Often connections are corroded
by salt water or rain. Unplug the power cord
and plug it back together.
HEADLIGHT ADJUSTMENT
The center of the front light’s beam should
have half the height at 5 meters in front of
the bike.
The center of the front light’s beam should
hit the road at a maximum of 10 meters in
front of the bike.
For correction of the adjustment loosen the
mounting screw and tilt the front light as
desired. Tighten the screw.
LIGHTING SYSTEM
61
10 m
WRONG
WRONG
OK.

Related product manuals