RIESE & MULLER load - Bosch Drive System

66
BOSCH DRIVE
All Riese & Müller and blueLABEL models
are fitted with a Bosch drive. All you need
to know is to find inside the separately
attached Bosch manual. Carefully read the
information about battery and charger
handling.
If your E-bike has a drive with a performance
of max. 250 watts and the electrical as
-
sistance is limited to 25 km/h, you have an
license-free E-bike. The legal requirements at
page 8 apply.
The HS-models do not belong to the bicycles
category. Please read the article “E-Bikes –
HS-models” at page 10 – 11.
ECDECLARATION OF CONFORMITY
The EC-declaration of conformity is attached
to the Bosch-manual of your bike. Please
keep it safe.
DANGER!
Your local dealer must maintain
your E-Bike on a regular base
for a correct and safe operation.
Immediately remove the battery
from the E-bike when you nd a
defect at the electric system and
contact your local dealer. Also
contact your local dealer for
questions, problems or defects.
Lack of technical knowledge
may lead to serious accidents.
DANGER!
Remove the battery before you
transport or start to work on
your E-Bike. An unintended ac-
tivation of the E-Bike drive can
lead to injuries.
TIP!
Please note that your E-Bike has no
light when the battery is removed or
the E-Bike system is shut down.