77
INFORMATION REGARDING WEAR
Some parts of your E-bike are subject to
functional wear. The amount of wear de
-
pends on the maintenance of the E-bike and
the riding conditions (mileage, riding in the
rain, dirt, salt, etc.). Bicycles that are often
standing outside in the weather are subject
to increased wear. These parts require regu
-
lar maintenance and care but will (depending
on the intensity of use and riding conditions)
eventually reach the end of their useful life.
These parts must be replaced when they
reach there wear limit.
These include:
• chain
• brake cables
• grips
• chain ring and sprockets
• shift cables
• tires
• saddle cover
• brake pads
• rims
The pads or rim and disc brakes are subject
to functional wear. Sporty use or riding in
mountainous terrain shortens the life of the
pads. Check the pads regularly and replace
them as needed. You can acquire replace
-
ments from your local dealer. Rim brakes
not only wear out the pad but also the rim
itself. Therefore check the rim regularly such
as when inflating the tire. The sidewall of
the rim contains a groove that functions as a
wear indicator. When this groove is no longer
visible, the rim must be replaced. If deforma
-
tions or fissures in the rim sidewalls occur
when inflating the tire, the rim has reached
the end of its service life and needs to be
replaced.
Your dealer has performed the
nal assembly of the E-bike.
He has to perform a nal check
and a test ride.
ATTENTION!
To Next Page
Loading...
