Periodic Maintenance
CAUTION
~
I Cooling water
Check the amount
of
cooling water when using the water chiller. If the water
level is low, add water. Periodic re
pl
aceme
nt
of
cooling water is also
recommended.
I Cooling water filter
This filter removes impuriti
es
from the
coo
li
ng
water.
If
th
e filter becomes
clogged with impurities, the water pressure may not
ri
se
appropriatel
y.
We
recommend changing
th
e filter at periodic intervals.
I Observation window
The observati
on
window used in the SmartLab
SE
is made
of
high lead content
glass. Pay atten
ti
on to the fo
ll
owing precautions when using
or
cleaning the
window.
Compared to normal glass, high lead content glass is easier to have cloudy
stains that persistently remain. Please pay atten
ti
on to the following
precautions.
• Do not u
se
wet cloth
or
water to clean the glass. Immediately wipe
off
water
wi
th a dry cloth in case the glass becomes wet.
•
If
the glass becomes dirty, po
li
sh it slightly hard with a clean cloth
li
ke
ga
uze using alcohol
or
a glass polisher suitable for lead glass. Wipe again
afterwards with a dry cloth.
• Leaving water
or
dirt (fingerprints) on the glass might cause cloudy stains
which may not be completely removed.
• Besides a
ll
of
the above, clean the glass once a month to prevent the glass
from becoming cloud
y.
106
SmartLab SE: Automated Multipurpose X-ray Diffractometer
Riguku
To Next Page
Loading...
