Attachments can be installed on the universal Z attachment platform. Attachment
base is not required for the attachments listed below.
For
details, refer to the
instruction manual
of
each attachment.
I ASC-6/ASC-10 attachment
Consecutive measurements can be performed by switching multiple samples
mounted on the turret. The rotational axis (~s) on the sample surface plane
enables performing measurements while rotating the sample thereby averaging
the variation
of
particle sizes.
TheASC-6
attachment (optional: 2430H 101) for six samples
or
the ASC
-1
0
attachment (optional: 2430H20 I) for ten samples can be selected. The vertical
transmission geometry (optional: 2455H
l0
5)
is
also available inASC-6.
ASC-6
ASC-10
( optional: 24308101) ( optional: 24308201)
SmartLab S
E:
Automated Multipurpose X-ray Diffractometer
79
To Next Page
Loading...
