RIGDOO HT-10 - Page 20

Contact us at support@RIGDOO.tech
16
on. You can also bring HT-10 back into motion detection
mode by turning off Time Lapse.
12) [Language]: To set language of HT-10
English(Default) | Deutsch | Dansk | Suomi | Svenska |
Español | Français | Italiano | Nederlands | Portugués |
简体中文 | 繁體中文 | 日本語
13) [Endless Capture]: Endless Capture determines whether HT-10
will stop shooting when the SD card is full.
 Off (Default) → HT-10 will stop shooting when the SD card
is full.

On → HT-10 will cover the oldest videos or photos to
keep recording continuously when the memory card is full.
14) [Time & Date]: Set the current time and date & modify time
format or date format.

Set time & date → Set current time and date.
(Requires entry of military time)

Time format → 24h: Military time | 12h: Standard time
(AM/PM)
 Date format → dd/mm/yyyy | yyyy/mm/dd | mm/dd/yyyy
15) [Photo Stamp] : Select the time stamp format you want to
display on your photos.

Time & Date (Default) → Both display the date & time of
recording.
 Date → Only display the date of recording.

Off → No display any date & time info.
16) [Password Protection]: Set a password to protect your HT-10.

Off (Default) → No password. Everybody can turn on