Rigel Optics 2300 - User Manual

7 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Rigel Optics

477 South 28

th

St., Suite 3

Washougal, WA 98671

www.rigeloptics.com

Tel 360-835-5629

NIGHT VISION BINOCULAR

Rigel 2300

User Manual

Questions and Answers

X
xbrownJul 30, 2025
Why is the image dim on my Rigel Optics Binoculars?
- W
  walsherinJul 30, 2025
  If you're experiencing low brightness or a dim image with your Rigel Optics Binoculars, here's what you can check: 1. **Battery Level:** Try changing the batteries, as the current may be low. 2. **Illumination:** Ensure the object you're viewing is adequately lit. If not, switch on the IR illuminator. 3. **Lens Condition:** A dirty objective lens can cause dimness. Clean the lens carefully. 4. **Lens Cover:** Make sure the lens cover is removed, especially in low-light conditions (below 5 lux).
J
Julia BennettAug 13, 2025
What to do if there is no image on my Rigel Optics 2300 Binoculars?
- T
  Tiffany SimpsonAug 13, 2025
  If there is no image on the image tube of your Rigel Optics Binoculars, consider the following: * **Dead Batteries:** The batteries might be dead. Replace them with new ones. * **Poor Battery Contact:** The connection between the batteries and the contact points may be disrupted. Clean the battery contact points. * **Light Amplifier Overload:** The Light Amplifier may have been overloaded. In this case, replace the cap, power the unit down, wait for 5 minutes, and then power it back up.

Summary

Introduction to Rigel Optics Night Vision

Care Guidelines for Night Vision Device

Rigel 2300 Technical Specifications

Assembly Diagram of Night Vision Device

Pre-operation Instructions

Operating the Night Vision Binocular

Maintenance of Night Vision Scope

Storage and Transport Guidelines

Troubleshooting Common Issues

Product Warranty Information

Rigel Optics 2300 Specifications

General

Brand	Rigel Optics
Model	2300
Category	Binoculars
Language	English