Chapter 4 Programming Examples RIGOL
DG800 Programming Guide 4-19
3. Click ToolsOptions.
Add the Include and Lib paths in the Directories tab in the pop-up interface.
Note:
The two paths added here are related to the installation path of NI-VISA on your PC. By default,
NI-VISA is installed under C:\Program Files\IVI Foundation\VISA.
Select Include files from the drop-down list under Show directories for. Double click the empty
space under Directories to enter the specified path of Include files: C:\Program Files\IVI
Foundation\VISA\WinNT\include. Click OK to close the dialog box.
To Next Page
Loading...
