Rigol DG811 Quick Guides

1
Guaranty and Declaration
Copyright
© 2018 RIGOL (SUZHOU) TECHNOLOGIES INC. All Rights Reserved.
TrademarkInformation
RIGOL is a registered trademark of RIGOL (SUZHOU) TECHNOLOGIES INC.
PublicationNumber
QGB11100-1110
Notices
 RIGOL products are covered by P.R.C. and foreign patents, issued and pending.
 RIGOL reserves the right to modify or change parts of or all the specifications and pricing
policies at the company’s sole decision.
 Information in this publication replaces all previously released materials.
 Information in this publication is subject to change without notice.
 RIGOL shall not be liable for either incidental or consequential losses in connection with the
furnishing, use, or performance of this manual, as well as any information contained.
 Any part of this document is forbidden to be copied, photocopied, or rearranged without prior
written approval of RIGOL.
ProductCertification
RIGOL guarantees that this product conforms to the national and industrial standards in China
as well as the ISO9001:2015 standard and the ISO14001:2015 standard. Other international
standard conformance certifications are in progress.
ContactUs
If you have any problem or requirement when using our products or this manual, please contact
RIGOL.
E-mail: service@rigol.com
Website: www.rigol.com
General Safety Summary
1. Only the exclusive power cord designed for
the instrument and authorized for use
within the local country could be used.
2. Ensure that the instrument is safely
grounded.
3. Observe all terminal ratings.
4. Use proper overvoltage protection.
5. Do not operate without covers.
6. Do not insert objects into the air outlet.
7. Use the proper fuse.
8. Avoid circuit or wire exposure.
9. Do not operate the instrument with
suspected failures.
10. Provide adequate ventilation.
11. Do not operate in wet conditions.
12. Do not operate in an explosive
atmosphere.
13. Keep instrument surfaces clean and dry.
14. Prevent electrostatic impact.
15. Handle with caution.
16. Please use the front-panel BNC output
connector correctly. It is only allowed to
output signal.
Safety Notices and Symbols
Safety Notices in this Manual:
WARNING
Indicates a potentially hazardous situation or practice which, if not avoided, will
result in serious injury or death.

Rigol DG811 Specifications

General

Brand	Rigol
Model	DG811
Category	Laboratory Equipment
Language	English