RIGOL Chapter 4 Programming Examples
4-8 DG800 Programming Guide
LabVIEW Programming Example
Program used in this example: LabVIEW 2009
Function realized in this example: search for the instrument address, connect to the instrument, send
and read commands.
1. Run LabVIEW 2009, and then create a VI file named DG800_Demo_LABVIEW.
2. Add controls to the front panel interface, including the Address field, Command field, and Return
field, the Connect button, the Write button, the Read button, and the Exit button.
3. Click Show Block Diagram under the Window menu to create an event structure.
To Next Page
Loading...
