Rigol DG822 - Page 90

RIGOL Chapter 2 Command System
2-76 DG800 Programming Guide
[:SOURce[<n>]]:FUNCtion:DUALTone:OFFSETFreq
Syntax
[:SOURce[<n>]]:FUNCtion:DUALTone:OFFSETFreq {<frequency>|MINimum|MAXimum}
[:SOURce[<n>]]:FUNCtion:DUALTone:OFFSETFreq?
Description
Sets the offset frequency of the dual-tone signal of the specified channel.
Queries the offset frequency of the dual-tone signal of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<frequency>
Real
Refer to "Remarks".
0 Hz
Remarks
 When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
 The offset frequency, frequency 1 and frequency 2 satisfy the following relations.
12
FFF
offset
−=
;
Wherein,
offset
F
——offset frequency;
1
F
——frequency 1;
2
F
——frequency 2.
Return Format
The query returns the offset frequency in scientific notation, with 7 effective digits. For example,
2.000000E+03 (the offset frequency is 2 kHz).
Example
:SOUR1:FUNC:DUALT:OFFSETF 2000 /*Sets the offset frequency of the dual-tone signal of CH1 to 2 kHz.*/
:SOUR1:FUNC:DUALT:OFFSETF? /*Queries the offset frequency of the dual-tone signal of CH1 and the
query returns 2.000000E+03.*/
[:SOURce[<n>]]:FUNCtion:PRBS:BRATe
Syntax
[:SOURce[<n>]]:FUNCtion:PRBS:BRATe {<bit_rate>|MINimum|MAXimum}
[:SOURce[<n>]]:FUNCtion:PRBS:BRATe? [MINimum|MAXimum]
Description
Sets the PRBS bit rate of the specified channel.
Queries the PRBS bit rate of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<srate>
Real
2 kbps to 30 Mbps
2 kbps
Remarks
When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
Return Format
The query returns the PRBS bit rate in scientific notation, with 7 effective digits. For example,
3.000000E+03 (the PRBS bit rate is 3 kbps).