Indicates a potentially hazardous situation or practice which, if not avoided,
could result in damage to the product or loss of important data.
SafetyTerms on the Product:
It calls attention to an operation, if not correctly performed, could result in
injury or hazard immediately.
It calls attention to an operation, if not correctly performed, could result in
potential injury or hazard.
It calls attention to an operation, if not correctly performed, could result in
damage to the product or other devices connected to the product.
Safety Symbols on the Product:
Protective Earth
Terminal
Care and Cleaning
Care
Do not store or leave the instrument where it may be exposed to direct sunlight for long periods
of time.
Cleaning
Clean the instrument regularly according to its operating conditions.
1. Disconnect the instrument from all power sources.
2. Clean the external surfaces of the instrument with a soft cloth dampened with mild detergent
or water. Avoid having any water or other objects into the chassis via the heat dissipation
hole.When cleaning the LCD, take care to avoid scarifying it.
CAUTION
To avoid damage to the instrument, do not expose it to caustic liquids.
To avoid short-circuit resulting from moisture or personal injuries, ensure that
the instrument is completely dry before connecting it to the power supply.
Document Overview
This manual introduces some basic information that you should know when you use the DG800
series function/arbitrary waveform generator for the first time. It contains the following contents:
product overview, how to connect the instrument to the AC power, turn-on checkout, and
remote control.
For the latest version of this manual, download it from the official website of RIGOL
To Next Page
Loading...
