RIGOL
2 DL3000 Quick Guide
General Safety Summary
1. Only the exclusive power
cord designed for the
instrument and authorized
for use within the local
country could be used.
2. Ensure that the instrument is
safely grounded.
3. Observe all terminal ratings.
4. Use proper overvoltage
protection.
5. Do not operate without
covers.
6. Do not insert objects into the
air outlet.
7. Use the proper fuse.
8. Avoid circuit or wire exposure.
9. Do not operate the instrument
with suspected failures.
10. Provide adequate ventilation.
11. Do not operate in wet conditions.
12. Do not operate in an explosive
atmosphere.
13. Keep instrument surfaces clean
and dry.
14. Prevent electrostatic impact.
15. Handle with caution.
Safety Notices and Symbols
Safety Notices in this Manual:
WARNING
Indicates a potentially hazardous situation or practice which, if not
avoided, will result in serious injury or death.
CAUTION
Indicates a potentially hazardous situation or practice which, if not
avoided, could result in damage to the product or loss of
important data.
Safety Terms on the Product:
It calls attention to an operation, if not correctly performed,
could result in injury or hazard immediately.
It calls attention to an operation, if not correctly performed,
could result in potential injury or hazard.
It calls attention to an operation, if not correctly performed,
could result in damage to the product or other devices
connected to the product.
To Next Page
Loading...
Need help?
General
