Need help?Do you have a question about the Rigol DL3032 and is the answer not in the manual?
General| Model | DL3032 |
|---|---|
| Channels | 2 |
| Maximum Voltage | 150 V |
| Maximum Current | 30 A |
| Voltage Resolution | 1 mV |
| Current Resolution | 0.1 mA |
| Output Voltage Range | 0 to 150 V |
| Output Current Range | 0 to 30 A |
| Power Rating | 300 W |
| Current Accuracy | ±(0.05% of reading + 0.05% of range) |
| Current Measurement Accuracy | ±(0.05% of reading + 0.05% of range) |
| Operating Modes | CC, CV, CR, CP |
| Display | 4.3 inch LCD |
| Interface | USB, RS232 |
| Type | Programmable DC Load |
| Resolution | 1mV, 0.1mA |
| Voltage Measurement Accuracy | ±(0.05% of reading + 0.05% of range) |
To Next Page
