RIGOL
Service Guide for DM3000 Series
5. Frequency Gain Test
In frequency gain test, input the standard signal the test equipment outputs into
the input terminal of tested equipment; and compare the test results with the error
shown in the table 3-10 and 3-11.
Table 3-10 Frequency Gain Error of the Standard Equipment (DM306X)
Notes:
[1] Use coaxial-cable as the lead for the input signal;
[2] The reading resolution is 6½ ;
[3] Q: Optional quick test point.
Table 3-11 Frequency Gain Error of the Standard Equipment (DM305X)
Notes:
[1] Use coaxial-cable as the lead for the input signal;
[2] The reading resolution is 5½ ;
[3] Q: Optional quick test point.
To Next Page
Loading...
