RIGOL
Service Guide for DM3000 Series
Capacitance Test
In capacitance test, input the standard signal from testing equipment into the
equipment to be tested; and compare the test results with the error shown in the table
3-16 and 3-17.
Table 3-16 Capacitance Test Error of the Standard Equipment (DM306X)
Notes:
[1] Specifications are for 60 minutes warm–up using Math Null;
[2] Q: Optional quick test point.
Table 3-17 Capacitance Test Error of the Standard Equipment (DM305X)
Notes:
[1] Specifications are for 60 minutes warm–up using Math Null;
[2] Q: Optional quick test point.
To Next Page
Loading...
