RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
Save finished: The storage progress has finished.
The storage is empty: Current position of the memory is empty to recall saved
waveforms or settings.
Measurement already selected: The measurement parameter you pressed is
already displayed on screen.
Dot display only: Use Dots type for display under this setting.
Failed operation on files: Failed to operate on files in USB memory device
Failed print: Failed to perform print.
Failed upgrade: Failed to upgrade from a USB drive
Files are covered: The original file will be replaced by a new file when store a new
file to the memory.
To Next Page
Loading...
