Need help?Do you have a question about the Rigol DS1054 and is the answer not in the manual?
General| Bandwidth | 50 MHz |
|---|---|
| Channels | 4 |
| Sample Rate | 1 GSa/s |
| Vertical Sensitivity | 1 mV/div to 10 V/div |
| Timebase Range | 5 ns/div to 50 s/div |
| Vertical Resolution | 8 bits |
| Display Resolution | 800x480 pixels |
| Interfaces | USB Host, USB Device, LAN |
| Input Coupling | DC, AC, GND |
| Display | 7 inch TFT LCD |
| Trigger Types | Edge, Pulse, Video, Slope, Alternate |
| Waveform Capture Rate | 30, 000 wfms/s |
| Input Impedance | 1 MΩ ± 2% |
| Memory Depth | 24 Mpts (Single Channel), 12 Mpts (Dual Channel) |
Guide for inspecting packaging, instrument, and accessories.
Steps to connect the instrument to AC power.
Procedure for powering on and initial self-checks.
Guide for connecting the probe to the oscilloscope.
Instructions for connecting logic probes.
Steps to verify probe functionality.
Procedure to adjust probes for accurate measurements.
Diagram and description of the front panel components.
Diagram and description of rear panel interfaces.
Describes VERTICAL controls (CH1-CH4, MATH, REF, POS, SCALE).
Details on HORIZONTAL controls (POSITION, MENU, SCALE).
Details on TRIGGER controls (MODE, LEVEL, MENU, FORCE).
Usage of CLEAR, AUTO, RUN/STOP, and SINGLE keys.
Use of the knob for brightness and menu navigation.
Overview of the main function menus (Measure, Acquire, etc.).
Lists common instrument problems and their remedies.
Solutions for waveform display problems and USB connectivity.
To Next Page