Need help?Do you have a question about the Rigol DS1000 Series and is the answer not in the manual?
General| Trigger Modes | Edge, Pulse, Video, Slope, Alternate |
|---|---|
| Timebase Range | 5 ns/div to 50 s/div |
| Channels | 2 |
| Input Impedance | 1 MΩ ±2%, 15 pF ±3 pF |
| Vertical Resolution | 8-bit |
| Interfaces | USB Host, USB Device |
| Input Coupling | AC, DC, GND |
| Power Supply | 100-240 VAC |
| Dimensions | 303 mm |
Defines warning terms and symbols used in the manual and on the instrument.
Introduces the oscilloscope's front panel layout, knobs, and keys for basic operation.
Provides a quick procedure to verify the instrument's basic operational status.
Explains the process to match probe characteristics with the oscilloscope's input.
Describes how to use the AUTO function for automatic signal display setup.
Explains how to configure the vertical controls for signal display and sensitivity.
Guides users on adjusting horizontal controls for sweep speed and position.
Details how to set up trigger controls for stable waveform acquisition.
Covers understanding and setting up the oscilloscope's vertical and horizontal systems.
Details the trigger system's modes, sources, and settings for stable triggering.
Provides solutions for common issues like no display, missing waveforms, and unstable displays.
To Next Page
