RIGOL
© 2006 RIGOL Technologies, Inc
User‟s Guide for DS1000 Series
Appendix C: General Care and Cleaning
General Maintenance
Do not store or leave the instrument in where the instrument will be exposed to direct
sunlight for long periods of time.
Caution
To avoid damages to the instrument or probes, do not expose them to sprays, liquids,
or solvents.
Cleaning
Inspect the instrument and probes often based on its operating conditions require.
Before cleaning, please disconnect it from all power sources and clean it with a mild
detergent and water. Make sure the instrument is completely dry before reconnecting
it to a power source.
To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the instrument and probes with a lint- free
cloth. Take care to avoid scratching the clear plastic display filter.
2. Use a soft cloth dampened with water to clean the instrument.
Note: To avoid damages to the surface of the instrument or probes, do not
use any abrasive or chemical cleaning agents.
To Next Page
Loading...
