RIKA PARO - 7 Assembly;Dismantling Stone; Dismantling Stone

18
7. ASSEMBLYDISMANTLING STONE
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled completely�
Note
During assembly / dismantling do not allow objects (screws etc�) to
fall into the pellet container – they can block the screw conveyor
and damage the stove�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments�
Select soft bases to prevent scratches to your living space furniture
and stove panels�
Dismantling stone
Open the container lid to the stop, it remains open in this position�
Open the door of the combustion chamber�
Open the 4 hex head bolts and remove the two stone holders�
Tip the stone slightly forwards and lift it out of the floor bracing� Pay
attention to the edges of the stone to prevent damage� Place the
stone on a suitable base�
Re-assemble the parts in reverse order�
#8