16
Cleaning flue pipes
The flue pipes should be cleaned at least 2 x a year or after approx. 700 kg
pellets. The flues are behind the combustion chamber.
Loosen the 4 allen screws and slide the confection fins to the right.
You can pick up the confection fins now.
You can now remove the 4 screws of the combustion chamber lid, remove the
lid and place it on a soft surface.
Open the two hex screws and remove the cleaning lid.
Now clean the flues with the included wire brush.
Remove the ash tray.
Open the 4 thumb screws and remove the cleaning lid.
Vacuum-clean the combustion residues in the flue gas manifold, especially the
transition areas to the side flue gas channels (left and right).
Mount the removed parts in reverse order.
Note
Your stove may suck in false air via incorrectly sealed cleaning covers; this
air may lead to incomplete combustion in the fire trough and thus piling up of
pellets. Repair or replace seals depending on condition.
#3
#5
#8
To Next Page
Loading...
