Rikon Power Tools 10-305 User Manual

Record the serial number and date of purchase
in your manual for future reference.
Serial number:
Date of purchase:
For more information:
www.rikontools.com or info@rikontools.com
For Parts or Questions:
techsupport@rikontools.com or 877-884-5167
Part # 10-305M4
10” Woodworking Bandsaw
Model: 10-305
Owner’s Manual

Rikon Power Tools 10-305 Specifications

General

Motor Power	1/3 HP
Blade Diameter	10 inches
Table Size	13-3/4 x 11-3/4 in.
Voltage	120V
Dust Port	2-1/2 inches
Weight	35 lbs
Motor	Induction
Speed	1725 RPM
Blade Size	10 inches
Table Tilt	0 to 45 degrees
Arbor Size	5/8 inch
No Load Speed	1725 RPM

Summary

Safety Instructions

General Safety Warnings

Covers grounding, environment, cleanliness, visitors, and operator condition for safe operation.

Special Safety Rules for Bandsaws

Specific safety guidelines to follow when operating the bandsaw.

California Proposition 65 Warning

Information regarding chemicals in dust and potential health risks.

Assembly

Tools Required for Assembly

Lists necessary tools for assembling the bandsaw.

Unpacking and Checking Contents

Steps for unpacking the bandsaw and verifying all components.

Initial Assembly Steps

Instructions for installing key components like the table and fence.

Getting to Know Your Bandsaw

Bandsaw Components Overview

Identifies and labels the main parts of the bandsaw.

Adjustment

Centering the Table

Steps to correctly center the table relative to the saw blade.

Setting Table Square to Saw Blade

Procedure for aligning the table perpendicular to the saw blade.

Tilting the Table

Instructions for adjusting the table's tilt angle for bevel cuts.

Adjusting the Rip Fence

Guide on how to adjust the rip fence for proper clamping pressure.

Changing and Adjusting the Saw Blade

Detailed procedure for replacing and fine-tuning the saw blade.

Tracking the Bandsaw Blade

Procedure for aligning the saw blade to run correctly on the wheels.

Setting the Cutting Height

Instructions on adjusting the upper blade guide for desired cutting height.

Adjusting the Blade Guides

Guide for setting both upper and lower blade guides for optimal blade support.

Operation

General Operation Guidelines

Key principles for safe and effective bandsaw operation, including starting and feeding.

Blade Selection and Cutting Techniques

Advice on choosing the right blade and performing straight, curved, or beveled cuts.

Maintenance

Routine Cleaning and Care

Instructions for keeping the bandsaw clean and ensuring proper operation.

Blade Tension for Storage

Guidance on releasing blade tension for extended periods of non-use.

Troubleshooting

Common Problems and Solutions

Diagnoses and remedies for issues like the machine not starting or blade not cutting.

Electrical Requirements

Grounding and Power Connection

Ensures proper electrical grounding and connection for safety.

Notes

Printing Error Notification

Informs users about an error regarding the listing of a miter gauge.

Parts List

Component Identification

Diagram and list identifying all parts of the bandsaw.

Warranty

5-Year Limited Warranty Terms

Details the warranty coverage, exclusions, and claim procedures.

Accessories

Available Bandsaw Accessories

Lists optional accessories such as stands, miter gauges, and blades.