To Next PageTo Next Page
Need help?Do you have a question about the Rikon Power Tools 10-324 and is the answer not in the manual?
General| Type | Band Saw |
|---|---|
| Motor Power | 1.5 HP |
| Table Size | 15-3/4 x 21-5/8 in. |
| Table Tilt | 5° left, 45° right |
| Blade Width Capacity | 1/8 to 3/4 inches |
| Blade Speed | 1, 445 / 2, 950 FPM |
| Cutting Height Capacity | 13 inches |
| Cutting Width Capacity | 13-5/8 in. |
| Cutting Capacity (Height) | 13 in. |
| Cutting Capacity (Width) | 13-5/8 in. |
Essential safety guidelines for operating the bandsaw during installation and use.
Instructions on how to unpack the kit and verify all parts are present and undamaged.
Procedure for safely removing the existing bandsaw blade before installation.
Steps for removing old upper guides and installing the new tool-less guide assembly and guard.
Procedure for removing the original lower blade guides and guard assembly.
Steps for installing the new tool-less lower blade guide and guard assembly.
Reassembly steps including installing the lower drive wheel, belt, and the bandsaw blade.
Instructions on how to apply the adhesive scale to the upper blade guard.
Detailed steps for setting the upper and lower blade guides for optimal performance.
Fine-tuning the guide post and upper blade guard alignment and height.
Guidelines for cleaning, checking components, and general upkeep of the bandsaw.
Visual illustration showing the numbered parts of the retrofit kit.
List of all parts with descriptions, quantities, and part numbers for reference.
Specific instructions and options for fitting the kit on older bandsaw models.
