Rikon Power Tools 10-600VS - User Manual

Rikon Power Tools 10-600VS

17 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Model: 10-600VS

16” VS Scroll Saw

www.rikontools.com

10-600VSM1

Operator’s Manual

Record the serial number and date of purchase in your manual for future reference.

Serial Number: _________________________ Date of purchase: _________________________

For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167

Table of Contents

Questions and Answers

B
brooksalexisJul 27, 2025
Why does my Rikon Power Tools 10-600VS vibrate?
- M
  Marvin BrownJul 27, 2025
  If your Rikon Power Tools Saw vibrates, it might be due to an unsuitable underlay. A heavier workbench reduces vibration, so consider using a solid wood bench instead of plywood. Also, ensure the workbench is securely screwed down and not resting on the motor. Check that the motor is securely fastened and that the holders are properly aligned by loosening the screws, aligning them perpendicularly, and then retightening the screws.
B
Billy BurnsAug 5, 2025
How to prevent saw blades from breaking on my Rikon Power Tools Saw?
- C
  Courtney ClarkeAug 5, 2025
  If the blades on your Rikon Power Tools Saw are breaking, there are several potential causes. The tension might be incorrectly set, so ensure you adjust it to the correct setting. The load might be too great, so feed the workpiece more slowly. You might be using the incorrect type of saw blade, so verify that you are using the correct blades. Also, make sure you are not exerting side pressure and that the workpiece is fed straight.
A
Aaron HessAug 15, 2025
What to do if the motor on my Rikon Power Tools 10-600VS does not function?
- A
  Andrea ClaytonAug 15, 2025
  If the motor on your Rikon Power Tools Saw does not function, the power extension cable might be faulty, so try changing it. Also, the saw might be incorrectly installed. Refer to the instructions in this manual to ensure correct installation.

Summary

RIKON 16 VS Scroll Saw Operators Manual

Operator Safety: Required Reading

General Safety Warnings

Key safety precautions including grounding, work area, apparel, and personal protective equipment.

Special Safety Rules for Scroll Saws

Specifications

Assembly

Installation

Steps for setting up the saw bench, adjusting the angle, and mounting the saw on a workbench.

Workbench Mounting and Blade Installation

Changing the Saw Blades

Detailed procedure for removing and installing both pinless and pinned saw blades safely.

Blade Handling Procedures

Saw Blade with Pins

Electrical Requirements

General Usage and Maintenance

Inside Cuts

Maintenance

Motor and Saw Arm Bearings Lubrication

Troubleshooting

Warranty Information

Rikon Power Tools 10-600VS Specifications

General

Brand	Rikon Power Tools
Model	10-600VS
Category	Saw
Language	English

Related product manuals

Preview: Rikon Power Tools 10-622VS

Rikon Power Tools 10-622VS

Preview: Rikon Power Tools 10-300

Rikon Power Tools 10-300

Preview: Rikon Power Tools 10-326

Rikon Power Tools 10-326

Preview: Rikon Power Tools 10-324

Rikon Power Tools 10-324

Preview: Rikon Power Tools 10-305

Rikon Power Tools 10-305

Preview: Rikon Power Tools 10-325

Rikon Power Tools 10-325

Preview: Rikon Power Tools 10-321

Rikon Power Tools 10-321

Preview: Rikon Power Tools 10-345

Rikon Power Tools 10-345

Preview: Rikon Power Tools 10-320

Rikon Power Tools 10-320

Preview: Rikon Power Tools 10-3061

Rikon Power Tools 10-3061

Preview: Rikon Power Tools 10-324TG

Rikon Power Tools 10-324TG