EasyManua.ls Logo

Ring Powering SmartChargePRO Series - Safety Information; Safe Usage Guidelines; Battery Compatibility

Ring Powering SmartChargePRO Series
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Safety
RISK OF EXPLOSION Only connect the battery leads when the mains supply is disconnected.
Explosive gasses may escape from the battery during the charging process. Prevent flames and sparks
and provide adequate ventilation during charging
Indoor use only
Disconnect the supply before breaking or making the connection to the battery
Not suitable for use with non-rechargeable batteries
In addition to the battery types and capacity detailed in the specifications, the charger is suitable for
the following only:
Charging only a single battery at any one time
Charging rechargeable lead acid (wet), Gel, AGM and calcium batteries with 6 cells
The Ring SmartChargePro automatically adjusts the charge rate applied as the battery charges.
When the battery is fully charged the charging process stops. As the battery naturally discharges
further charging is applied until the battery is again fully charged. This is an ongoing process to allow
for safe battery charging for an indefinite period.
The supply lead cannot be replaced. If the cord is damaged the SmartChargePro should be replaced.
The SmartChargePro is not suitable for use by any person (including children) with reduced physical,
sensory or medical capabilities or lack of experience or knowledge.

Related product manuals