Need help?Do you have a question about the ring 5W21S8 and is the answer not in the manual?
General| Brand | ring |
|---|---|
| Model | 5W21S8 |
| Category | Flood Light |
| Language | English |
Essential safety warnings, electrical precautions, and installation requirements before mounting the floodlight.
Securely attach the mounting bracket to your electrical box with the power off at the breaker.
Align the mounting plate over the bracket and fasten it with a screw, ensuring wires pass through.
Attach the floodlight's copper wire to the green ground screw and junction box ground wire.
Connect the white wire to white and black wire to black using wire nuts for power supply.
Slide the floodlight onto the mounting plate posts and secure with screws, then restore power.
Loosen the top knob to adjust light angles, then tighten to fix the position.
Install the Ring app to guide you through setting up and managing your floodlight.
Ensure the Ring Beams Bridge is operational to connect your floodlight to the Ring system.
Follow in-app instructions after tapping 'Set Up a Device' and selecting 'Beams'.
Integrate a Spotlight Cam Wired with your Floodlight for combined powers, following specific steps.
Details on compliance with FCC Rules and Industry Canada standards for radio interference.
Recommended steps to correct harmful interference if radio or television reception is affected.
Warning that unauthorized modifications may void operating authority for the device.
Maintain a 20 cm separation distance for FCC/IC RF exposure compliance during operation.
To Next Page
