ring Floodlight Battery - Remove the back cover; Remove the battery lid

Smart Lights
Alarm
Doorbells
Security Cams
Chimes
Set up your Floodlight Battery
in the Ring app.
In the app, tap Set Up a Device.
When prompted, select Smart
Lights and follow the in-app
instructions.
After setup, replace the back cover
(be sure to line up the arrows).
Insert the
batteries.
Insert four D Cell
batteries (not included),
matching the flat ends
with the springs.
Then place the lid onto
the compartment and
push down to snap it
into place.
6