EasyManuals Logo

ring Floodlight Cam Wired Pro Quick Start

ring Floodlight Cam Wired Pro
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
WARNING: Risk of electrical shock.
Installation by a qualified electrician may be required
in your area. Refer to your local laws and building
regulations before performing electrical work; permits
and/or professional installation may be required by law.
Turn o power at the consumer unit before installing.
Verify that the supply voltage is correct. Connect fixture to a 100~240
VAC 50/60 Hz power source.
The Earth wire must be connected to the light fixture. DO NOT INSTALL if
a working earth connection is not available.
Do not connect this light fixture to a dimmer switch or timer.
CAUTION: Risk of fire.
Do not install near combustible or flammable surfaces.
Floodlight Cam must be installed on a wall or eave.
AVERTISSEMENT : risque de décharge électrique.
L’installation par un électricien qualifié peut être
requise dans votre région. Reportez-vous aux lois et
réglementations de construction locales avant d’eectuer
des travaux électriques ; des permis et/ou une installation
professionnelle peuvent être exigés par la loi.
Avant installation, coupez l’alimentation au niveau du tableau électrique.
Vérifiez que la tension d’alimentation est correcte. Connectez l’appareil
à une source d’alimentation de 100 à 240 VCA 50/60 Hz.
Le fil de terre doit être connecté au projecteur. NE PAS INSTALLER si
aucune connexion de mise à la terre en état de marche n’est disponible.
Ne connectez pas cet éclairage à un variateur ou à une minuterie.
ATTENTION : risque d’incendie.
Ne pas installer l’appareil à proximité de surfaces combustibles ou inflammables.
La Floodlight Cam doit être installée sur un mur ou un avant-toit.
Ring_TPUB_Cams_Marlin_FloodlightCamPro_Wired_EU_UserGuide_i1b_MP_v2.indd 4Ring_TPUB_Cams_Marlin_FloodlightCamPro_Wired_EU_UserGuide_i1b_MP_v2.indd 44/13/21 3:23 PM4/13/21 3:23 PM

Other manuals for ring Floodlight Cam Wired Pro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ring Floodlight Cam Wired Pro and is the answer not in the manual?

ring Floodlight Cam Wired Pro Specifications

General IconGeneral
TypeIP security camera
Luminous flux2000 lm
Day/night modeYes
Color temperature3000 K
Placement supportedOutdoor
Connectivity technologyWireless
Built-in HDD-
Built-in sirenNo
Mounting typeCeiling/wall
Product colorBlack
Country of originChina
AC input voltage100 - 240 V
Power source typeAC
Number of lenses1
Operating temperature (T-T)-28 - 48 °C
Total megapixels- MP
Maximum resolution- pixels
Supported video modes1080p
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Harmonized System (HS) code85258900
Weight and Dimensions IconWeight and Dimensions
Depth202 mm
Width326 mm
Height217 mm
Package depth360 mm
Package width16.3 mm
Package height24.8 mm

Related product manuals