ring RPP70 User Manual

5
2
AC charging
3
Recharging the PowerPack
30 hours
Disconnect any 12v DC appliances
• Plug the 230v AC mains charger into the
charging socket on the PowerPack
• Plug the mains charger into 230v AC mains supply
• Turn on mains supply
• Charging is indicated by the red ‘Charging indicator’
LED illuminating
• Once charging is complete the ‘Charging / Charged’ LED will
change from red to green
• A full charge takes approximately 30 hours
NB: If the charge light changes to green before 30 hours on
the initial charge, continue charging for the remainder of
the 30 hours.
Powering 7Ah PowerPack Instructions.indd 4 30/04/2010 13:39

ring RPP70 Specifications

General

Brand	ring
Model	RPP70
Category	Power Pack
Language	English