ring RPP70 User Manual

6
1
2
3
4
5
Vehicle jumpstarting
Ensure the ON/OFF switch is in the ‘OFF’ position
Disconnect any 12v DC appliances
Turn off the LED work light
Turn off the vehicle ignition
Position the PowerPack on a flat surface away from engine
moving parts.
Connect the booster cable
Red (+) clip to the red positive (+) battery terminal
Black (-) clip to the black (-) battery terminal
Check Connection
If the Reverse polarity indication LED illuminates the battery
clips are connected incorrectly. Check the connections and retry.
Rotate the ON/OFF switch to the ‘ON’ position.
Ensure cables are clear of moving parts before starting the engine.
Powering 7Ah PowerPack Instructions.indd 5 30/04/2010 13:39

ring RPP70 Specifications

General

Brand	ring
Model	RPP70
Category	Power Pack
Language	English