6
7
Turn over the engine in 3 second bursts until the engine starts.
With the vehicle’s engine running, leave the PowerPack for 2-3mins
to fast charge the PowerPacks batteries before disconnecting.
DC appliances are connected and powered by connecting to the
PowerPacks DC power socket.
The LED work light is operated by sliding the selection switch the
LED position.
The USB charging socket allows the recharging of electronic
devices including moblie phones and MP3 players
The USB feature is selected by sliding the selection switch to the
USB position.
Disconnect booster cables
For optimum and long life performance ‘RECHARGE THE
POWERPACK’.
7
8
9
12v DC Power
LED Work Light
USB charging socket
12v DC
socket
15
A
Powering 7Ah PowerPack Instructions.indd 6 30/04/2010 13:39
To Next Page
Loading...
