ring Transformer User Manual

Plug in your Transformer.
Your Transformer must be
connected to a covered,
weatherproof GFCI
protected receptacle. If
you don’t have a covered,
weatherproof GFCI
protected receptacle,
you’ll need to hire a
licensed electrician to
install one.
3. Complete installation.
Run cable to fixtures.
Starting at the Transformer, run the cable to each
light fixture, leaving about 12” of cable after the last
fixture.
Connect the light fixtures to the
cable.
Secure the light fixtures to the cable according to
the fixture manufacturer’s instructions.
Leave a little extra cable at each fixture in case you have to adjust their
location.
14

ring Transformer Specifications

General

Brand	ring
Model	Transformer
Category	Controller
Language	English