Rinnai E- Series User Manual

29 008082013GW
Signal maximum flow water temperature exceeded
(T1 ˃ 212⁰F).
T1 Sensor
Actual flow
temperature should be
verified before T1 is
determined.
Check actual flow
temperature
WARNING:
Turn off power and wat
er
s
upply
to the boiler before removing or installing any parts.

Rinnai E- Series Specifications

General

Fuel Type	Natural Gas or Propane
Installation	Wall-mounted
Type	Condensing
Venting	Direct Vent
Dimensions	Varies by model
Weight	Varies by model
Warranty	12 years heat exchanger, 5 years parts
Heating Capacity	15, 000 - 199, 000 BTU/h
Vent Type	Direct Vent