Do you have a question about the Rinnai E75CN and is the answer not in the manual?
Defines the boiler's intended purpose for central heating and domestic hot water.
Explains safety symbols and terms like DANGER, WARNING, CAUTION, and NOTICE.
Critical safety warnings and instructions to follow before operating the boiler.
Step-by-step guide on how to start and operate the Rinnai Q-Series boiler.
Procedure for safely shutting off the gas supply to the appliance.
Guidance on avoiding substances and environments that can cause boiler corrosion.
Instructions on monitoring and maintaining the central heating system's water pressure.
Details the Rinnai Q boiler's features as a condensing, modulating heating unit.
Explains the integrated control system, outdoor sensor, and RS100 thermostat integration.
Detailed explanation of the function and purpose of each button on the boiler control panel.
Warns against attempting repairs or panel removal, advising to contact qualified service personnel.
Explains the 'Good' and 'Technical' display modes and how to switch between them.
Lists and explains codes indicating the boiler's operational status.
Explains display messages like FILL and HIGH related to water pressure issues.
Instructions on how to retrieve and check the water pressure reading on the display.
Detailed step-by-step guide for filling and topping up the central heating installation.
Explains the automatic de-aeration program that runs after replenishment.
Instructions for setting the boiler to holiday mode using the thermostat.
Explains fault codes and how to reset the boiler.
Guide on cleaning the condensate collection and disposal system.
States that appliance maintenance and changes must be done by a qualified technician.
Informs where to find warranty conditions, typically on a supplied card.