Rinnai E- Series User Manual

54 008082013GW
Check the water pressure regularly and top off the installation when necessary. The
working pressure of the installation should be between 16 and 18 PSI when the system is
cold. Adjust your auto-feed to 16 – 18 PSI.
Note: You must have either a hot water or heat demand to activate de
-
aeration
Filling the heating system

Rinnai E- Series Specifications

General

Fuel Type	Natural Gas or Propane
Installation	Wall-mounted
Type	Condensing
Venting	Direct Vent
Dimensions	Varies by model
Weight	Varies by model
Warranty	12 years heat exchanger, 5 years parts
Heating Capacity	15, 000 - 199, 000 BTU/h
Vent Type	Direct Vent